[SN 206830002] USED GIBSON USA / Les Paul Standard 60s [03]

Used GIBSON USA Les Paul Standard 60s in stock. Fretted and fretted. The capacitor has been replaced with a Sonic OC-223. The plate attached to the tone control knob has been removed. There are scratches, dents, paint peeling on the back, parts are dull, and the paint is peeling off the top. Serial number|206830002 Year of Manufacture Country of Manufacture|USA Case|Hard Case Accessories|- Weight|4.15kg Truss Rod: No problem. Fretboard: No problem, enough fretboard height String height (bass string side)|2.0mm above 12th fret String height(treble string side)|1.5mm above 12th fret Nut width|43.0mm Neck thickness(near 1st fret)|21.1mm Neck thickness (near 12th fret)|23.6mm SCALE|628mm (24.75″) RADIUS|305mm (12″) Strings in setup|ERNIE BALL 2221 / .010-.046 set Modified parts|- Repair/Maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise and tenon adjustment Other|- Item Rank: B: Fairly scratched and used, but no problems in normal use. Serial Number: 206830002 Country of manufacture: USA Case: Hard Case Weight: 4.15kg Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right Fretboard Height: No problem, fretboard is high enough. String Height: Bass string side: 2.0mm above 12th fret String height on treble string side: 1.5mm above 12th fret Nut width: 43.0mm Neck thickness near 1st fret: 21.1mm Neck thickness near 12th fret: 23.6mm SCALE: 628mm (24.75″) RADIUS: 305mm (12″) Strings in setup: ERNIE BALL 2221 / .010-.046 set Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing * The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors. The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument. * This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time. We apologize in advance if the item is sold out after you place your order. Specs (Japanese only) Product rank B: Fairly scratched and used, but no problem in normal use. 12 months old Serial No. 206830002 Country of manufacture U.S.A. Case Hard Case Weight 4.15kg Truss Rod No problem, rod is confirmed to be 60 degrees to the left and right. Leftover frets No problem, there is enough fret height String Height Low String Side 2.0mm above 12th fret String height on treble string side 1.5mm above the 12th fret Nut width 43.0mm Neck thickness near 1st fret 21.1mm Neck thickness near 12th fret 23.6mm Scale 628mm (24.75″) RADIUS 305mm (12″) Strings for setup ERNIE BALL 2221 / .010-.046 set Repair and maintenance Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing Reviews There are no reviews yet. Be the first to review “[SN 206830002] USED GIBSON USA / Les Paul Standard 60s [03]” Cancel replyYour email address will not be published. Required fields are marked *Your rating * Rate… Perfect Good Average Not that bad Very poor Your review *Name * Email * Save my name, email, and website in this browser for the next time I comment.