[SN 115059] USED EPIPHONE / OLYMPIC MADE IN JAPAN NATURAL [03]

EPIPHONE OLYMPIC MADE IN JAPAN NATURAL is in stock used. This is an Olympic model of the Epiphone line, which was manufactured at the Matsumoku factory in Japan from the mid-1970s to the 1980s. The design has a German curve on the silhouette of the early 60’s with a unique deign. Body material is maple, maple set neck with rosewood fingerboard, two original humbuckers, and front escutcheon has been replaced. The frets have been adjusted to match, so it is in good playing condition. The case handle is broken, so please be careful when carrying it around. The case is damaged. Although there are some signs of use throughout, the strings have been replaced with new ones, and each part has been cleaned, maintained, and set up by our repair department after our receipt of this item. We also offer a 1-year warranty to ensure that you can use the instrument for a long time after purchase. Item Rank: B: Fairly scratched and used, but no problem for normal use. Serial Number: 115059 Case: Hard case (handle broken), please be careful when carrying it. Weight: 4.03kg Truss Rod: Note: I have checked the rod to 60 degrees left and right and it is fine (not much left). Fretboard: note that the frets are low, but can still be cut. String height on bass string side: 2.0mm above 12th fret String height on treble string side: 1.5mm above 12th fret Nut width: 42.8mm Neck thickness near 1st fret: 20.6mm Neck thickness near 12th fret: 22.9mm SCALE: 648mm (25.5″) RADIUS: 305mm (12″) Strings in setup: ERNIE BALL 2221 / .010-.046 set Repair and maintenance parts: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, and tone removal. * Please note that this is a used instrument and there are scratches, dents, and other damage that are not easily seen in the photos or described in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos. * If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors. The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument. * This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time. We apologize in advance if the item is sold out after you place your order. Specs Product rank B: Fairly scratched and used, but no problem in normal use. 12 months old Serial No. 115059 Case Hard case (handle broken), please be careful when carrying it. Weight 4.03kg Truss Rod No problem (not much left). Remaining frets There is a note that it can still withstand cutting, but the frets are low. String Height Low String Side 2.0mm above the 12th fret String height on high string side 1.5mm above the 12th fret Nut width 42.8mm Neck thickness near 1st fret 20.6mm Neck thickness near 12th fret 22.9mm Scale 648mm (25.5″) RADIUS 305mm (12″) Strings for setup ERNIE BALL 2221 / .010-.046 set Repair and maintenance Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, and burr removal (Tone) Reviews There are no reviews yet. Be the first to review “[SN 115059] USED EPIPHONE / OLYMPIC MADE IN JAPAN NATURAL [03]” Cancel replyYour email address will not be published. Required fields are marked *Your rating * Rate… Perfect Good Average Not that bad Very poor Your review *Name * Email * Save my name, email, and website in this browser for the next time I comment.